Allied Moulded LH-11P Keyless Lampholder, 660 W, 250 VAC, Medium Incandescent Lamp

LH-11P MFG #: LH-11P

Features

Nickel-plated brass screw shell, mountings lots accept 3.5 or 4 in outlet boxes, accepts most manufacturers light bulb protective cages
Plated carbon steel fasteners
Heat resistant thermoset material
4 terminal screws (mounting screws included)
Item designation: P according to DIN EN 61346-2, H according to DIN 40719 extendable after IEC 204-2/according to IEC 750
Suitability for integration pressure selection button, suspension switch, front element, suspension pushbutton
Operating cycles/maximum: 1000 per hr, electrical operating cycles as operating time/with contactors 3RT1015 to 3RT1026/typical: 100000000, mechanical operating cycles as operating time/typical: 10000000
IP20 of terminal enclosure, IP40 of housing
Auxiliary Contacts: 2 X 1 - 1.5 sq-m solid, 2 X 0.5 - 0.75 sq-mm solid with conductor end processing, 2 X 0.5 - 1.5 sq-mm stranded with conductor end processing, 2 X 18 - 14 AWG conductors
0.8 Nm tightening torque
Rated Impulse Voltage: 4 kV
250 VAC rated insulation voltage