Zoeller®

Zoeller® 53-0001 Mighty-Mate M53 Automatic Effluent/Dewatering Submersible Pump, 43 gpm Flow Rate, 1-1/2 in Outlet, 1 ph, 3/10 hp, Cast Iron

ZOM53 MFG #: 53-0001
Zoeller® 53-0001 Mighty-Mate M53 Automatic Effluent/Dewatering Submersible Pump, 43 gpm Flow Rate, 1-1/2 in Outlet, 1 ph, 3/10 hp, Cast Iron
  • Amperage Rating: 9.7 A
  • Bearing Type: Sleeve
  • Cord Type: 3-Wire
  • Country of Origin: US
  • Dimensions: 10.0625 in H x 10.06 in W
  • Frequency Rating: 60 Hz
  • Horsepower: 3/10 hp
  • Impeller Type: Non-Clogging Vortex
  • Manufacturer Name: Zoeller Company
  • Maximum Head: 19-1/4 ft
  • Motor Speed: 1550 rpm
  • Outlet Size: 1-1/2 in
  • Phase: 1 ph
  • Series: Mighty-Mate M53
  • Type: Automatic
  • Voltage Rating: 115 VAC
The Mighty-Mate series of submersible pumps is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. Cast iron models include a epoxy powder coated finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller® pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance. This attention to detail is an inherent feature of every pump in this series, making it one of the most reliable in the industry.
  • Features and More

Features

  • Corrosion-resistant, powder coated epoxy finish
  • No sheet metal parts to rust or corrode
  • Stainless steel screws, switch arm, guard and handle
  • No screens to clog, watertight, neoprene square ring between motor and pump housing
  • Solid, buoyant, polypropylene float, oil filled, hermetically sealed, automatic reset thermal overload protected motor
  • Upper and lower sleeve bearings running in bath of oil, Entire unit pressure-tested after assembly, carbon and ceramic shaft seal
  • Watertight and dust tight, permanently oiled bearings
  • Cast iron switch case, motor and pump housing, engineered thermoplastic base, glass filled, plastic impeller with metal insert
  • Entire unit pressure-tested after assembly
  • Class B insulation, 7-1/4 in/3 in auto On/Off points
  • 1/2 in spherical solid handling, 9 ft cord, oil filled cooling
  • Cast iron cap, motor and pump housing, base, carbon and ceramic mechanical seals, engineered plastic impeller, stainless steel hardware, neoprene gasket
  • AISI 1215 cold roll steel motor shaft
  • Single phase, shaded pole, 3 wire cord and plug
  • 1-1/2 in NPT discharge

Application

  • Dewatering (Sump)
  • Enhanced Flow Step Systems
  • Low Pressure Pipe (LPP) and Septic Tank

Standards/Approvals/Certifications

  • CSA/US Certified
  • SSPMA Certified
  • UL Listed