REHAU® 266207 Support Bend With Screw Hole, For Use With 3/8 and 1/2 in RAUPEX® Pipe, Polymer

The polymer support bends allow installers to create 90 deg bends in RAUPEX® pipes without fitting an elbow. These one-piece polymer support bends create a 90 deg bend by snapping RAUPEX pipes into the integrated tabs. The integrated tab on the inside of the bend has a screw hole/slot for secure mounting to a support or stud (tab not included with 10.1 mm bend). This slot will accept screws 1/4 in (0.25 mm) in diameter.