Simpson Strong-Tie®

Simpson Strong-Tie® ZN25114 Nailon™ Drive Pin Anchor, 1/4 in Dia, 1-1/4 in OAL, Die-Cast Zamak 3 Alloy Body Shell, Carbon Steel Pin, Mushroom Head Head

ADN25125 MFG #: ZN25114
1/4" x 1-1/4" Drive Anchor
  • Body Shell Material: Die-Cast Zamak 3 Alloy
  • Diameter: 1/4 in
  • Drill Size: 1/4 in
  • Head Type: Mushroom Head
  • Manufacturer Name: Simpson Strong-Tie
  • Minimum Embedment Depth: 5/8 in, 3/4 in, 1-1/2 in
  • Overall Length: 1-1/4 in
  • Pin Material: Carbon Steel
  • Series: Nailon™
  • Shear Strength: 160 lb/190 lb/265 lb at 3000 psi
  • Tensile Strength: 150 lb, 195 lb, 265 lb at 3000 psi
  • Brand: Simpson
  • Type: 1-Piece
B-Line Drive Nail Anchor, 1-1/4 in Overall Length, 1/4 in Drill, 5/8 in Minimum Embedment Depth, 35/64 in OD x 9/64 in H Head, 205 lb Shear Strength, 145 lb Tensile, Zinc Plated
  • Features and More

Features

  • Zinc Nailon™ anchors are low cost, easy-to-install anchors for applications under static loads
  • Pin and head configuration designed to make anchor tamper resistant
  • Carbon steel pin
  • The allowable loads are based on a safety factor of 4
  • 590 lb/780 lb/1050 lb ultimate tension load at 3000 psi for concrete
  • 635 lb/765 lb/1050 lb ultimate shear load at 3000 psi for concrete
  • 2600 to 2700 deg F freezing/melting point

Application

  • For a low cost solution on light duty applications under static loads

Standards/Approvals/Certifications

  • OSHA 29 CFR 1910.1000
  • Federal Specification A-A-1925A
  • Type 1