Southwire®

Southwire® Titan2® 55082703 Type LTM-UL Liquidtight Flexible Metal Conduit, 3/4 in Trade, 0.82 to 0.84 in ID x 1.03 to 1.05 in OD, 100 ft L, Steel

LT34MTL
Southwire® Titan2® 55082703 Type LTM-UL Liquidtight Flexible Metal Conduit, 3/4 in Trade, 0.82 to 0.84 in ID x 1.03 to 1.05 in OD, 100 ft L, Steel
  • Bend Radius: 5 in
  • Country of Origin: US
  • Finish: Hot Dipped Galvanized
  • Flexibility: Flexible
  • Inside Diameter: 0.82 to 0.84 in
  • Length: 100 ft
  • Manufacturer Name: Southwire Company
  • Material: Steel
  • Outside Diameter: 1.03 to 1.05 in
  • Temperature Rating: -22 to 176 deg F
  • Trade Size: 3/4 in
  • Type: Type LTM-UL
  • Voltage Rating: 600 VAC
Titan® type UL is manufactured with a spiral wound strip of heavy gauge, corrosion-resistant, hot dipped galvanized steel. For 3/8 in through 1-1/4 in trade sizes, the core is constructed with a square locked steel strip with an integral copper bonding strip enclosed within the steel convolutions. For 1-1/2 in through 4 in trade sizes, the core is constructed with a fully interlocked steel strip. A rugged, flame retardant, flexible PVC jacket is extruded over-the steel core. The gray jacket resists oils, mild acids and exposure to sunlight. Also available in other colors subject to minimum runs.
  • Features and More

Features

  • Oil-resistant, sunlight-resistant
  • A protective thermoplastic outer jacket which seals out water, liquids, abrasives, alcohol, coolants, corrosive fumes and gases, dirt, grease, mineral acids, non-concentrated fixed alkalines, petroleum oils, salt air and spray and weather
  • Smooth metal interior for easy wire pulling
  • UV sunlight-resistant jacket
  • Accepts standard metallic liquid tight fittings
  • Rated for direct burial applications including concrete encasement
  • A rugged, flame retardant, flexible PVC jacket is extruded over-the steel core
  • The gray jacket resists oils, mild acids and exposure to sunlight
  • Where the conditions of installation, operation or maintece require flexibility or protection from liquids, vapors, solids or weather
  • Applications requiring movement, crossover connections or tight bends
  • Exposed or concealed locations

Application

  • For used in industrial and commercial applications for conveyors
  • blowers
  • cranes
  • air conditioners
  • machine tooling and lubrication equipment applications

Standards/Approvals/Certifications

  • ARRA Compliant
  • Buy American Act Compliant
  • ANSI/NFPA-70
  • NEC Article 350
  • ANSI/UL 360
  • CSA 22.2 No. 56
  • NEC Certified
  • PROP65: This product contains material that, the State of California has determined, may cause cancer. www.P65Warnings.ca.gov